Shopping Cart
There are no more items in your cart
Container of chips, hot galvanized
m500002520
€1,756.00
1.756,00 € (tax incl.)
Container of hot galvanized shavings designed for the separation of metallic waste and liquids in industrial environments. Facilitates the handling of loads by forklift Trucks In logistics and recycling tasks.
- Charging capacity: Supports up to 1000 kg with a storage volume of 0.75 cubic meters.
- Filtering system: It incorporates three-millimeter perforated intermediate screen and an inch drain tap.
- Sleeves fork: Structure with open end cavities and safety system to avoid accidental landslides.
- Mechanism of dump: It allows emptying at any height by cable driven from the driver's seat.
Container available in a variety of designs: it has a dumping mechanism and the emptying angle is ideal
Attributes
- Ideal for separating fluid chips; draining and collecting
- Mid-frame drilled, screwing 100 mm on the floor, perforation Ø 3 mm, separation 6 mm
- 1" drain tap for liquid drainage
- You can empty at any cable height driven from the driver's seat
- Wall of the body with reinforced edge throughout the perimeter
- Robust frame with sleeves fork
- It can be ensured to avoid slip and involuntary emptying.
- Welding water and oil
- Total length (mm)
- 1440.0
- can be stacked
- Not
- Finish
- hot galvanized
- Weight (kg)
- 182.0
- GTIN (Previous EAN)
- 4052462025189.0
- Mounting status for dispatch
- assembly
- load capacity
- 1000.0
- charging capacity per unit of measurement
- kg
- type of collection
- pockets for forks
- distance between forks (mm)
- 495.0
- inner width fork cavities (mm)
- 200.0
- inner height fork cavities (mm)
- 60.0
- pick-up address
- along (low narrow)
- position of collection
- down
- position of the loading hook (mm)
- 725.0
- open/closed fork cavities
- Open end
- High discharge surface (mm)
- 495.0
- Total height (mm)
- 680.0
- Width (mm)
- 1280.0
- volume in M³
- 0.75
New
