Shopping Cart
There are no more items in your cart
Container of chips, hot galvanized
m500002514
€1,557.00
1.557,00 € (tax incl.)
Container of hot galvanized shavings designed for the separation of metallic waste and liquids in mechanical workshops. Allows collection, filtering and safe emptying materials by forklift.
- Mechanism of dump: Cable powered system from the driver's seat for emptying at any height.
- Filtering of liquids: 3 mm perforated intermediate screen and 1-inch drain tap.
- Stanca structure: Wall with reinforced edge and watertight welding and oil for safety.
- Charging capacity: Support of 1000 kg and volume of 0.5 m³ for intensive use.
Container available in a variety of designs: it has a dumping mechanism and the emptying angle is ideal
Attributes
- Ideal for separating fluid chips; draining and collecting
- Mid-frame drilled, screwing 100 mm on the floor, perforation Ø 3 mm, separation 6 mm
- 1" drain tap for liquid drainage
- You can empty at any cable height driven from the driver's seat
- Wall of the body with reinforced edge throughout the perimeter
- Robust frame with sleeves fork
- It can be ensured to avoid slip and involuntary emptying.
- Welding water and oil
- Total length (mm)
- 1440.0
- can be stacked
- Not
- Finish
- hot galvanized
- Weight (kg)
- 151.0
- GTIN (Previous EAN)
- 4052462025103.0
- Mounting status for dispatch
- assembly
- load capacity
- 1000.0
- charging capacity per unit of measurement
- kg
- type of collection
- pockets for forks
- distance between forks (mm)
- 150.0
- inner width fork cavities (mm)
- 200.0
- inner height fork cavities (mm)
- 60.0
- pick-up address
- along (low narrow)
- position of collection
- down
- position of the loading hook (mm)
- 725.0
- open/closed fork cavities
- Open end
- High discharge surface (mm)
- 495.0
- Total height (mm)
- 680.0
- Width (mm)
- 780.0
- volume in M³
- 0.5
New
